Wear Resistant & Self-Lubricating
Three lubricant systems — silicone oil, PTFE and molybdenum disulphide — with wear resistance up to more than ten times that of POM.
01 Material Overview
The wear-resistant self-lubricating series is the main alternative to POM and PA66. By combining silicone oil, PTFE and molybdenum disulphide in different ways, it strikes different balances between coefficient of friction, wear rate, stiffness and cost.
JH960SI is the silicone oil system, with low friction and low noise, for slide rails and drive components; JH960TF2V and JH960TF4U add PTFE with UV stabilisation for outdoor high-load sliding parts; JH960MS2 uses molybdenum disulphide for heavily loaded gears; JH960G2TF2 and JH960G5TF2 layer 10% and 25% glass fibre on top of PTFE for stiffness plus wear resistance in high-stiffness drive parts.
Real-world wear performance depends heavily on the counterface material, surface roughness and lubrication conditions. Share the counterface details at the selection stage and we will recommend a match and arrange comparative friction and wear testing.
02 Included Grades
| Grade | Features / Notes |
|---|---|
| JH960SI NC | POK + silicone oil, low friction and low noise |
| JH906SI NC | POK + silicone oil, low flow for thick walls |
| JH960TF2V NC | POK + PTFE10% + UV |
| JH960TF4U NC | POK + silicone oil 2% + PTFE15% + UV |
| JH960MS2 NC | POK + molybdenum disulphide, heavy load |
| JH960G2TF2 NC | POK + GF10% + PTFE10% |
| JH960G5TF2 NC | POK + GF25% + PTFE10% |
| JH900G10TF2 NC | POK + GF50% + PTFE10%, high flow |
03 Supply & Specifications
| Material system | POK + lubricant system (silicone oil / PTFE / MoS2) |
|---|---|
| Optional reinforcement | GF10% / GF25% / GF50% |
| Process | Injection moulding |
| Colour | Natural / black |
| Packaging | 25 kg bag |
| Full properties | See the TDS of the grade |
* Typical values, not guaranteed specifications. For design purposes, always refer to the latest TDS of the grade concerned.
