PET
Crystalline engineering plasticHigh stiffness, heat resistant, dimensionally stable, good surface gloss
Electronic housings, automotive parts, appliance structures
PRODUCT CENTER
Products
Fifteen Hyosung POKETONE native grades, sixty-seven modified grades from Hyosung and our own compounding line, plus POK sheet and rod. Grouped by family, with a full grade index below so you can work back from a performance target.
POKETONE Resin
General Injection Moulding
M330A / M130F
M330A is the reference grade; M130F is the highest-flow food-contact grade, for thin walls, long flow paths and precision small parts.
POKETONE Resin
High Impact
M630A / M730R / M730F / M710F
M630A is the classic high-impact grade, the M730 series goes higher on impact, and M710F is an ultra-low-flow grade for extrusion.
POKETONE Resin
Food Contact
M130F / M330F / M630F
The F suffix denotes food-contact grades; declarations of compliance and migration test reports are supplied with them.
POKETONE Resin
Specialty Grades
M640A / M630V
M640A suits high-temperature service; M630V is for long-term outdoor exposure.
Modified POK
Glass Fibre Reinforced
JH960G3 / G6 / JH900G8 / G10
G3 / G6 / G8 / G10 correspond to 15% / 30% / 40% / 50% glass fibre loading.
Modified POK
Carbon Fibre Reinforced
JH960C2 / C6 / JH900CFST
C2 / C6 carry 10% / 30% carbon fibre; CFST is a high-flow carbon-fibre toughened system.
Modified POK
Wear Resistant & Self-Lubricating
JH960SI / TF2V / TF4U / MS2 / G2TF2 / G5TF2
Eight grades are available, combining different lubricant systems with glass fibre loadings.
Modified POK
Flame Retardant
JH960NH / JH960G6NH
NH is the unfilled flame-retardant system; G6NH is the GF30% reinforced version.
Modified POK
Toughened
JH960STP / JH906ST5 / JH900ST2
STP is the general toughening grade, ST5 is low flow for thick walls, and ST2 is high flow for thin walls.
Modified POK
Mineral Filled
JH960T2 / JH960T11 / JH960G3T5
T2 / T11 are mineral filled; G3T5 is a combined glass fibre and mineral system.
Modified POK
Low-Crystallinity Wear Grade
JH910EPV
For drive components with tight requirements on moulding shrinkage and dimensional tolerance.
Sheet & Rod
POK Sheet
POK SHEET
Stock thicknesses available on request; custom sizes supported.
CUSTOM COMPOUND
Submit a custom brief
Nothing fits exactly?
Glass and carbon loading, wear packages, flame retardant rating and colour can all be tuned to the duty. Our own compounding line handles everything from kilogram samples to volume supply.
GRADE INDEX
Full grade index
Work backwards from the performance target. If you are unsure, send us the duty and we come back with two or three candidates and the trade-offs.
| Grade | Type | System | Characteristics | Typical use |
|---|---|---|---|---|
| M130F | Native | POK terpolymer | MI200, very high flow, food grade | Thin-wall long-flow parts, small precision parts |
| M330A | Native | POK terpolymer | MI60, medium flow | General mouldings, structural parts |
| M330A-UV | Native | POK terpolymer + UV | MI60, UV stabilised | Outdoor and exterior parts |
| M330F | Native | POK terpolymer | MI60, medium flow, food grade | Food contact containers and packaging |
| M330F-S | Native | POK terpolymer | MI60, low bloom | Food contact and medical consumables |
| M330S | Native | POK terpolymer + UV | UV 0.3%, anti-yellowing | Light-coloured exteriors, appliance panels |
| M410F-S | Native | POK terpolymer | Low crystallinity, MI30 | Dimensionally stable parts, seals |
| M530F | Native | POK terpolymer | MI20, medium flow | Medium and thick-wall parts, fittings |
| M630A | Native | POK terpolymer | MI6, low flow, high impact | Gears, bearings, conveyor parts |
| M630F | Native | POK terpolymer | MI6, low flow, food grade | Cosmetic packaging, sanitary parts |
| M630V | Native | POK terpolymer + UV | MI6, UV stabilised | Outdoor load-bearing parts |
| M640A | Native | POK terpolymer | High crystallinity, MI6, high melting point | Heat-resistant structural parts |
| M710F | Native | POK terpolymer | Low crystallinity, MI3 | Extrusion, blow-moulded parisons |
| M730F | Native | POK terpolymer | MI3, very low flow, high impact | Water treatment parts, food machinery |
| M730R | Native | POK terpolymer | MI3, very low flow, UV stabilised | Sports equipment, luggage dampers |
| M33AF2Y | Modified | POK + flame retardant | Neat resin V0 FR, natural/black | Electronic housings, switches |
| M33AG2Y | Modified | POK toughened | Toughened, high impact | Impact-resistant housings, tool bodies |
| M33AG3A | Modified | POK + GF15% | Glass fibre reinforced | Structural parts, brackets |
| M33AG6A | Modified | POK + GF30% | Glass fibre reinforced, natural/black | High-stiffness housings, connectors |
| M33AR5A | Modified | POK toughened | Toughened, high impact, natural | Impact-resistant structural parts |
| M33AS1A | Modified | POK + silicone + UV | Silicone + UV modified, multi-colour | Sliding parts, exterior trim |
| M33AT2E | Modified | POK + PTFE10% | PTFE 10%, low wear | High-load sliding parts |
| M33FX0A | Modified | POK coloured | Factory dyed black | Visual parts |
| M332AG2JY | Modified | POK + GF10% + FR | GF10% + FR, V0 at 0.8 mm | Thin-wall FR structural parts |
| M33FG6A | Modified | POK + GF30% | Glass fibre reinforced, full water-contact approvals | Water treatment, sanitary structural parts |
| M63AS1B | Modified | POK + silicone | Silicone, low coefficient of friction | Gears, slide rails |
| M71VX0A | Modified | POK + HALS | 710F + 5‰ HALS | Outdoor extruded parts |
| M93AG9A | Modified | POK + GF50% | GF50%, high stiffness | High-load structural parts |
| M93FG6 | Modified | POK + GF30% | High flow, full water-contact approvals | Thin-wall water treatment parts |
| JH900C2 | Modified | POK + CF10% | Conductive, anti-static | Anti-static handling parts |
| JH900C6 | Modified | POK + CF30% | Conductive, high stiffness | EMI shielding parts |
| JH900CFST | Modified | POK + CF + toughener | High flow, conductive, toughened | Thin-wall conductive parts |
| JH900G4MS2 | Modified | POK + GF20% + MoS₂ | Reinforced, self-lubricating | High-load wear parts |
| JH900G6 | Modified | POK + GF30% | High flow, natural/black | Thin-wall high-stiffness parts |
| JH900G6MS2 | Modified | POK + GF30% + MoS₂ | Reinforced, self-lubricating | Heavy-duty gears |
| JH900G8 | Modified | POK + GF40% | Glass fibre reinforced | High-load structural parts |
| JH900G9 | Modified | POK + GF45% | Glass fibre reinforced, black | Ultra-high-stiffness parts |
| JH900G10 | Modified | POK + GF50% | Glass fibre reinforced | Thin-wall high-stiffness parts |
| JH900G10NH | Modified | POK + GF50% + FR | V0 FR, reinforced | Connectors, circuit breakers |
| JH900G10TF2 | Modified | POK + GF50% + PTFE10% | High stiffness, wear resistant | High-load sliding parts |
| JH900G10V | Modified | POK + GF50% + UV | High stiffness, weather resistant | Outdoor structural parts |
| JH900ST2 | Modified | POK toughened | High flow, high toughness | Thin-wall impact parts |
| JH906ESD | Modified | POK anti-static | Anti-static, natural/black | Electronics handling, anti-static parts |
| JH906SI | Modified | POK + silicone | Low flow, wear resistant | Thick-wall wear parts |
| JH906ST5 | Modified | POK toughened | Low flow, high toughness | Thick-wall impact parts |
| JH906TF3U | Modified | POK + PTFE10% + UV0.3% | Wear resistant, cold resistant, weather resistant | Low-temperature high-load sliding parts |
| JH910EPV | Modified | POK low-crystalline | Low crystallinity, wear resistant | High-precision drive parts |
| JH913V | Modified | POK + HALS | 710 base, weather resistant | Outdoor extruded parts |
| JH930V | Modified | POK + HALS | 30MI, black, UV stabilised | Outdoor load-bearing parts |
| JH935V | Modified | POK + HALS | 35MI, natural/black/yellow | Outdoor thin-wall parts |
| JH960 | Modified | POK terpolymer | Equivalent to M330A | General mouldings |
| JH960C2 | Modified | POK + CF10% | Conductive | Anti-static parts |
| JH960C6 | Modified | POK + CF30% | Conductive, high stiffness | EMI shielding parts |
| JH960ESD | Modified | POK anti-static | Natural, anti-static | Electronics handling parts |
| JH960G2 | Modified | POK + GF10% | Glass fibre reinforced, natural/black | Structural parts |
| JH960G2TF1 | Modified | POK + GF10% + PTFE5% | Reinforced, wear resistant | Gears, cams |
| JH960G2TF2 | Modified | POK + GF10% + PTFE10% | Reinforced, wear resistant, natural/black | Gears, cams |
| JH960G3 | Modified | POK + GF15% | Glass fibre reinforced (formerly JH960G15) | Structural parts, brackets |
| JH960G3MS2 | Modified | POK + GF15% + MoS₂ | Reinforced, self-lubricating | High-load wear parts |
| JH960G3T5 | Modified | POK + GF + mineral | Glass/mineral hybrid, low warp | Low-warp structural parts |
| JH960G3V | Modified | POK + GF15% + UV | Reinforced, weather resistant | Outdoor structural parts |
| JH960G4 | Modified | POK + GF20% | Glass fibre reinforced | Medium-load structural parts |
| JH960G5TF2 | Modified | POK + GF25% + PTFE10% | High stiffness, wear resistant | High-stiffness drive parts |
| JH960G6 | Modified | POK + GF30% | Glass fibre reinforced (formerly JH960G30) | High-stiffness housings, connectors |
| JH960G6NH | Modified | POK + GF30% + FR | V0 FR, reinforced, natural/black | Connectors, circuit breakers |
| JH960G6SI | Modified | POK + GF30% + silicone | Reinforced, low friction, natural/black | Drive parts, slide rails |
| JH960G6V | Modified | POK + GF30% + UV | Reinforced, weather resistant | Outdoor structural parts |
| JH960G7 | Modified | POK + GF35% | Glass fibre reinforced | High-stiffness parts |
| JH960G10 | Modified | POK + GF50% | Glass fibre reinforced | Thin-wall high-stiffness parts |
| JH960MS2 | Modified | POK + MoS₂ | Self-lubricating, wear resistant | Heavy-duty gears |
| JH960NH | Modified | POK + flame retardant | V0 FR | Electronic housings |
| JH960NH2 | Modified | POK + flame retardant | V0 FR, thin wall, multi-colour | Electronic housings |
| JH960SI | Modified | POK + silicone | Low friction | Slide rails, drive parts |
| JH960STP | Modified | POK toughened | High toughness | Impact-resistant housings |
| JH960T2 | Modified | POK + mineral10% | High density, natural/white | Counterweights, tactile parts |
| JH960T2TF2 | Modified | POK + mineral10% + PTFE10% | High density, wear resistant | Counterweight sliding parts |
| JH960T11 | Modified | POK + mineral55% + UV | High density, weather resistant | Counterweights, acoustic parts |
| JH960TF2 | Modified | POK + PTFE10% | Wear resistant, natural/black | Sliding parts |
| JH960TF2V | Modified | POK + PTFE10% + UV | Wear resistant, weather resistant | Outdoor drive parts |
| JH960TF4U | Modified | POK + PTFE15% + silicone2% | Very low friction | High-load sliding parts |
| JH960UNH2 | Modified | POK + flame retardant | V0 FR, white | Electronic housings |
| JH960V | Modified | POK + HALS | Weather resistant (formerly JH960VL) | Outdoor parts |
| POK SHEET | Sheet | POK extruded sheet | Machinable | Fixtures, liners, prototypes |
| POK ROD | Rod | POK extruded rod | Turnable | Short-run bushings and rollers |
84 grades and stock shapes in total · scroll inside the table to see them all
* System and characteristic descriptions reflect our internal grade naming. Physical properties follow the individual TDS. Custom systems not listed here can be developed separately.
SUPPORTING MATERIALS
Supporting materials: one window for the whole BOM
POK is our main line, but a project rarely needs only one material. These are often bought alongside POK; we can quote and ship them together, which means fewer suppliers to manage.
PC/PET alloy
A compromise between toughness and chemical resistancePC impact strength with PET solvent resistance
Automotive trim, power tools, structural partsPC/PBT alloy
Low warpage, chemical resistantDimensionally stable, resists chemical media, tough
Connectors, automotive parts, precision housingsTPEE
Thermoplastic polyester elastomerHigh resilience, fatigue resistant, wide temperature range
Dampers, seals, hard-soft co-extrusionFlame-retardant PP
A cost-sensitive flame-retardant optionFlame retardant, low density, chemical resistant
Appliance internals, building electrics, bracketsLow-temperature PC
Impact strength at low temperatureKeeps toughness in the cold, clear or opaque
Outdoor equipment, cold chain parts, security housingsAll of the above can be quoted by grade, colour and modification. POK sheet and rod are made in-house, with standard sizes shipping from stock.
Ask for a combined quote